Rotary Evaporator LRE-A13 is a high quality rotary evaporator to meet the distillation needs of laboratory applications. Its optimized bath volume allows for fast heat-up and the condenser has glass tubes that utilize the 15000 cm² surface extremely efficiently. It is crafted for minimal space requirement and is integrated with heating bath, automatic motorized lift and bottom discharge receiving flask making it ideal for even complex distillation processes. This model of rotary evaporator delivers reliable and reproducible process results that are usually reserved for far more costly systems.
Buy Now View Catalog| Evaporating Flask | 50 L / F 125 |
| Optional evaporating flask | 20 L + 10 L , bottom discharge |
| Condensing surface | 1.5 m2 |
| Max evaporating speed ( H2O ) | 10 L / hr. |
| Lifting type | Automatic Lifting |
| Condenser Type | Vertical condenser |
| Rotation Speed | 3 – 110 rpm |
| Reachable vacuum rate | < 133 Pa |
| Bath Power | 9 kW |
| Heating power | 9000 W |
| Rotation power | 400 W |
| Static temperature control range and wave | RT – 99 °C , 150 °C ± 2 °C |
| Bath size capacity | 70 L |
| Material | SUS 304 |
| Certifications | ISO and CE |
| Power | 220 V / 60 Hz |
| Dimensions | 1300 x 800 x 2300 mm |
Used for flavor extraction in food industry, solvent removal in separation and recycling chemical / educational / fuel / environmental industry , to determine sample concentration , HPLC and natural product sample preparation , drying down powders (using test tube adapter) and trapping hazardous waste liquid
| Model | LRE-A13 |
| Over current protection | Have |
| No – spark electric control | Have |
| Ex- proof upgrade | Ex-proof modification on motor, rotation & heating control, lower heating power density, equip dry heat and overheat cut-off protector |
| Model No. | LRE-A13 |
| PTFE rotary seal assembly | Have |
| PTFE discharge valve | PTFE |
| Digital Display | Bath Temperature , Rotation speed |
| Taper joint PTFE sleeve | Have |
| Vacuum gauge | Have |
| Continuous receiving | Have |
| Bumping system | Have |
| Charging valve | Glass |
| Water bath lid | Optional |
| Cold trap protection system | Optional |
| Thermometer neck for vapor | Optional |
| Evaporating flask unload handler | Optional |
| Ex proof motor | Optional |
| Overall flange joints | Have |
| Frequency conversion speed controls | Have |
| Throttle valve for vacuum | Have |
| Optional evaporating flask ( baffles on request ) | 10 L, 20 L , 30 L |
Labtron’s Rotary Evaporator are used to remove solvents from reaction mixtures. It consists of a motor unit that rotates the evaporation flask, a vacuum system, a heated water bath and a condenser. It is equipped with a vertical condenser making it ideal where there is limited bench space
Rotary Evaporating Flask : 3 L
Optional Evaporating Flask : 1 L, 2 L
Receiving Flask : 2 L
Evaporating flask : 10 L / F 95
Optional evaporating flask : 5 L , 10 L
Receiving flask : 5 L , bottom discharge
Evaporating flask : 20 L / F 125
Optional evaporating flask : 10 L , 20 L
Receiving flask : 10 L + 3 L , bottom discharge
Evaporating flask : 5 L + 1 L
Optional evaporating flask : 1 L , 2 L , 3 L
Receiving flask : 3 L
| Motor Type | Brushless DC motor |
| Speed Range | 20 to 200 rpm |
| Display | LED (speed, temperature, time) |
| Evaporating flask | 2 L |
| Lifting type | Manual lifting |
| Optional evaporating flask | 0.25 L , 1 L |
| Evaporating flask | 2 L |
| Lifting type | Automatic lifting |
| Optional evaporating flask | 0.25 L , 0.5 L , 1 L |
Talk to us?
